|
Cercon® Zirconia Systems
The Cercon® Zirconia System takes advantage
of the exceptional strength, toughness, reliability and biocompatibility of translucent Zirconia through the
accuracy and control of an innovative computer-aided manufacturing (CAM) and computer-aided design (CAD) process.
Whether your prescription calls for single units or long span bridges, Cercon has the solution.
The Cercon CAD components consist of the Cercon Eye Scanner which is used in
conjunction with the Cercon Art CAD Module for virtual preparation of crowns and bridges. The digital output
of the Cercon Eye can be visualized and customized using Cercon Art and then sent to the Cercon Brain or our
Central Manufacturing facility in York, PA for milling. The Cercon Eye scans dies and models for crowns, bridges
and abutments using a three camera system as well as a laser, which can precisely map out up to 16 units per
model. Automatic margin detection enables ease of case design. Coping thickness, margins and occlusion can all
be adjusted. With a scan time of less than 20 seconds per unit, and a scanning precision of 10 microns or less,
even difficult model geometries such as undercuts are easily read.
Cercon Zirconia blocks are manufactured in both white and ivory shaded blocks so
darker shades are easily achievable without any infiltration required. Meet your esthetic requirements with the
milled substructure that optimizes the esthetics of anterior restorations by creating a warm, natural appearance.
Cercon® Zirconia Milling System - # 555023
This kit contains: 1 - Cercon Brain, 1 - 5 pack Dust Collector Bags, 1 - Cercon Heat, 1 - Universal Power Supply,
1 - Cercon Clean, 1 - Detail Brush, 1 - Ney Surveyor Kit, 1 - Air Driven Turbine Handpiece with Water Spray, 1 - 5 pack Cercon Zirconia Shaded Base 12, 1 - 5 pack Cercon Zirconia Shaded Base 30, 1 - 5 pack Cercon Zirconia Shaded Base 38,
1 - Cercon Zirconia Shaded Base 47 Starter Kit, and Directions for Use.
above Cercon Zirconia System - for central suction # 555025
In this kit the Cercon Clean is replaced with Central Suction Adapter.
Cercon art cad module # 555100
This kit contains: 1 – Cercon Art PC, 1 – Keyboard,
1 – Accessory Kit with PC Cable Link, 1 – Cercon Art Software, 1 – Flat Screen Monitor, 1 – Cercon Move (Navigation Aid),
1 – Scan Holder and Accessory Kit, and Directions for Use.
Cercon speed module # 555101
This kit contains: 1 – PC - CPU, 1 – Cable,
1 – Keyboard, 1– Monitor Switch, 1 – Cercon Art Software.
Cercon Eye scanner # 555200
This kit contains: 1 – Cercon Eye Scanner, 1 – Cercon Eye Blockout Compound, 1 – Centric Spray (White).
For more information visit www.allceramiccrowns.com
<< back to the top >>
|
