| |
| |
| Products |
| Alloys |
|
|
| Contact Information |
|
DENTSPLY Ceramco
570 West College Avenue
York, PA 17404 USA
Phone: 800-487-0100
Email:
ceramcomkting@dentsply.com
DENTSPLY Ceramco
Technical Center
Six Terri Lane
Burlington, NJ 08016 USA
Phone: 800-487-0100
DENTSPLY's Neytech Service Center
13553 Calimesa Boulevard
Yucaipa, CA 92399
Phone: 800-835-6639
Please feel free to send an
e-mail to the Neytech
Service
Center with any questions
or concerns regarding
our equipment.
Our e-mail address is: equipmentrepair.ca
@dentsply.com |
|
|
| home > products > alloys > ultracrown™ pg |
|
UltraCrown™ PG 
The purest, castable gold alloy ever, UltraCrown™ PG, is now available. UltraCrown™ PG has a
higher purity than the leading premium yellow high noble alloy and presents a lustrous, rich gold surface
color. It is processed to one of the finest grain sizes available today. The physical properties of
UltraCrown™ PG ensure a wide range of porcelain compatibility.
- 99.8% Gold
- Rich, bright yellow gold color for highly esthetic restorations
- Excellent background for warm, vital porcelain shades
- Patent Pending
- Compatible with Ceramco®3, Ceramco II, Ceramco II Silver, Finesse®, Duceram® Plus, Duceragold® and most other conventional high and low fusing porcelain systems
- Almost transparent oxide promotes vitality in the restoration
- A majority of dental technicians surveyed agreed that the esthetics of UltraCrown™ PG are comparable to or better than GoldTech Bio 20001
- Easy to Use
- Suggested Use: single unit crowns
- Highly profitable for the lab and dentist-high noble alloy classification and rich yellow gold content gives both you and your dentists opportunities for premium pricing
Composition %
Alloy: UltraCrown™ PG
Au: 99.8%
Other: Zn, In, Ag, Mn
Properties
Color: Rich Yellow
Suggested Use: Single Units Only
CTE (500oC): 15.0 wide porcelain compatibility (see above)
Vickers Hardness: 40HV
Yield Strength: 5,800psi or 40MPa
Elongation %: 30
Density: 202dwt/in3 or 19.2g/cm3
Application
Melt Range: 1920/1940oF or 1050/1060oC
Casting Temperature: 2160oF or 1180oC
Burnout Temperature: 1300oF or 700oC
Pre Solder: Bio-Pre
1 GoldTech Bio 2000 is a trademark of the Argen Corporation
For more information on Alloys, the standard of performance, contact your DENTSPLY Ceramco representative today.
<< back to the top >>
|
|
|
